The cost efficiency of different combinations of fire protection measures
This article was originally published as part of The impact of automatic sprinklers on building design, an independent report produced by WSP, sponsored by the Business Sprinkler Alliance (BSA), published in September 2017.
Contents |
[edit] Introduction
This article provides background information on the pricing used within this document to determine the cost efficiency of different combinations of fire protection measures. It has been compiled based on our knowledge of building design with support provided by a qualified quantity surveyor to ensure a reasonable level of reliability in the figures quoted. The main references used here are Spon’s price books and the figures should be seen as indicative. Variations will occur for local reasons (e.g. central location means difficult access and parking) and, regional variations to building costs quoted here are estimated to be between +6% (in central London) and -10% (in Wales).
To enable comparison between different fire protection measures and the impact of different design features, costs are typically converted to a unit cost per m2 of floor area.
Further financial savings through reduced insurance premiums may also be realised although they are not considered further in this report.
[edit] Costs of water automatic sprinkler systems
An approximate estimate of installing automatic sprinkler systems to establish viability is given as follows:
- Sprinkler infrastructure: equipment installation, pipework, valve sets, booster pumps and water storage = £60,000 - £80,000
- Price per sprinkler head; including pipework valves and supports = £180 per head
Whilst the infrastructure cost (£60,000-£80,000) does vary depending on the building size, it only does so in a minor fashion due to fact that automatic sprinklers are designed to operate a fixed number of heads independent of floor area. Therefore as the building grows in size, the cost associated with the infrastructure does not vary significantly. This means that the cost efficiency of automatic sprinklers generally increases with building size.
The number of sprinkler heads required varies depending principally on the type of risk to be protected (i.e. category of building type) and layout. For most building types, automatic sprinklers are orientated on a 4m x 3m ceiling grid which gives 1 sprinkler head per 12m2 but as noted above, that is an ideal situation and further heads will be required to suit internal partitions and different building footprints. Therefore 15% has been added to the above figure to give a £/m2:
- £180 per head;
- 3m x 4m coverage from a single head;
- 15% layout allowance.
- Total = £17.25/m2 GIA [6] + Sprinkler infrastructure (£70,000)
Other factors may influence the area of coverage such as whether a building has deep ceiling voids which may need protection or sterile areas such as stairs and toilets that may not.
For a comparison the rates shown in Table 5-1 are “Shell and Core” costs for installing automatic sprinkler systems (including the water supply) for Offices with GIA between 3,000 – 15,000 m2 and hotels (2 to 5 stars). These rates highlight the variability in costs between building types.
[edit] Table 5-1: Generic pricing – sprinkler system installation
Building use | Installed as part of building shell Rate /m2 | Installed as part of building fit-out Rate /m2 |
Office – central London | £16.37 | £21.21 |
Office – regional (average) | £14.73 | £19.08 |
Warehouse ( fitted racking installed) | £42.32 | n/a |
Hotels (2 – 5*) | £20 – 30 | n/a |
To ensure these generic rates shown above (Table 5-1) are reasonable, specific cases of cost analyses provided by Spon’s price book (shown in Table 5-2) are reviewed;
- Installing a sprinkler system in the office building example shown in Table 5-2 costs £316k and averages to £16.37/m2 GIA. This rate is within the generic ranges quoted earlier (i.e. £17.25/m2 + £70k and £15-20/m2).
- In another example, the costs of providing automatic sprinkler system and dry risers to a 4* hotel were £596k and averaging to £36.12/m2. In order to compare this figure (£36.12/m2) with £20-30/m2 from Table 5-1 the cost of dry risers has to be discounted leaving the rate as £26.12/m2. This rate £26.12/m2 falls almost in the middle of the generic price range shown in Table 5-1 and confidence can be placed in the values presented.
These examples demonstrate that the actual cost of installing automatic sprinkler system for each building depends on many factors, however the rates quoted in Table 5-1 can be used as a guide for estimating costs based on GIA.
[edit] Table 5-2: Real examples of installing sprinkler system costs in different types of buildings
Cost / m2 GIA
Office building located in Central London, 15 floors, GIA = 19,300 m2
£316,000
£16.37/m2
4* Hotel, 200 bedrooms, located in Central London, 10 floors, GIA = 16,500 m2
(inc. dry risers) = £596,000
(inc. dry risers) =
£36.12/m2
Airport terminal building located in the South East, GIA= 25,000 m2
£790,000
£31.60/m2
Shopping mall located in the South East comprised;
Two storey retail area, GIA = 33,000 m2
£415,000
£12.57/m2
Covered car park, GIA = 13,000 m2
£270,000
£20.76/m2
Distribution centre (Warehouse), located in outer London, GIA = 75,000 m2 (inc. refrigerator area GIA=17,500m2)
(inc. racking protection)= £3,174,000
£42.32/m2
[edit] Costs of dry risers
The incorporation of automatic sprinklers into building design can be used to justify a reduction in the number of dry risers required in a building. All-in rates for approximate estimates of installing dry risers are as follows:
- 100mm dry riser + 2-way breeching valve and box (65mm landing valve + padlock + leather strap + automatic air vent + drain valve) = £1,500 per landing
The number of risers required depends on the layout of the building, as the minimum requirement is reported as “reach” from the dry riser outlet to completely cover the floor plate.
Different estimates for costing the installation of dry risers per GIA for offices and hotels are also quoted in Spon’s (see table 5-3). If an automatic sprinkler system is installed, a reduction of the number of dry risers by up to 33% (based on the 33% increase in reach from 45m to 60m) is theoretically possible. This is tabulated below.
[edit] Table 5-3: Generic pricing – “Shell and Core” installation of dry risers
Building type | Dry risers cost £/m2 GIA | Potential savings £/m2 GIA |
Offices (3,000 – 15,000 m2) | 3 – 5 | 1 |
Hotels | 8 – 12 | 2-4 |
[edit] Costs of staircases
One of the impacts of incorporating automatic sprinkler systems on the capital cost is to use the increased fire protection offered to look at the possible removal of escape staircases. The cost associated with constructing a staircase in an office building in central London with 13 floors is estimated at £200k with an average of c. £15k per floor. Stairs may also require secondary fire protection measures such as fire-rated lobbies and smoke ventilation systems. An example of the latter is a stair pressurisation system for which a rate of £6/m2 GIA is applicable.
[edit] Costs of glazing
Prices for fitting different types of glazing internally for compartmentation purposes (inclusive of labour costs) are as follows:
- 60min fire-resisting glazing = £600/m2
- 30min fire-resisting glazing = £426/m2
- Standard non-fire-resisting glazing = £40/m2
The above prices are for glass that can be used within the building interior, i.e. protected corridors, atriums etc. For external glazing, a self-conducted market survey yielded the following for rates for fire-rated façade systems. These have additions such as fire treatment on the glass itself, increased robustness of the frame and intumescent sealing of the edges:
- Non-FR glazed façade (£500/m2 – £700/m2)
- 30-min FR glazed façade (£900/m2 – £1,000/m2)
- 60-min FR glazed façade (£1,600/m2 – £1,800/m2)
- 90-min FR glazed façade (£2,000/m2 – £2,400/m2)
- 120-min FR glazed façade (£3,000/m2 – £3,400/m2)
[edit] Costs of structural fire protection
Prices for providing fire protection to steel structures expressed as cost per m2 rate of surface area of the steel:
Spray
- 60min-FR range (£8.55/m2 – £12.30/m2)
- 90min-FR range (£14.30/m2 – £20.00/m2)
- 30min-FR range (£8.70/m2 – £11.10/m2)
- 60min-FR range (£11/m2 – £23.50/m2)
- 90min-FR range (£32/m2 – £39/m2)
- 120min-FR range (£48/m2 – £59/m2)
FR boarding
- 30min-FR range (£29/m2 – £45.50/m2)
- 60min-FR range (£41/m2 – £62/m2)
This can be converted (approximately) to a more practical rate per floor area. Typical steel structure in buildings is 50 kg/m2 GIA (gross internal floor area). Typical steel mass per surface area in a structural element is 40 kg/m2. Therefore a price in (£ per painted surface area) can be converted to the conventional cost unit of £/m2 GIA;
£/m2 GIA = (£/m2 surface area) x (50 kg/m2 GIA) ÷ (40 kg/m2 surface area)
Spray
- 60min-FR range (£10.69/m2 GIA – £15.38/m2 GIA)
- 90min-FR range (£17.88/m2 GIA – £25.00/m2 GIA)
- 30min-FR range (£10.88/m2 GIA – £13.88/m2 GIA)
- 60min-FR range (£13.75/m2 GIA – £29.38/m2 GIA)
- 90min-FR range (£40/m2 GIA – £48.75/m2 GIA)
- 120min-FR range (£60/m2 GIA – £73.75/m2 GIA)
FR boarding
- 30min-FR range (£36.25/m2 GIA – £56.88/m2 GIA)
- 60min-FR range (£51.25/m2 GIA – £77.5/m2 GIA)
[edit] Summary of capital costs
Total cost of sprinkler system installation (ordinary hazard classification) | = £70k + (GIA x £17.25/m2) |
Total cost of dry risers | = £1,500 x number of floors x number of risers |
Cost of a staircase | = £15k x number of floors x number of staircases |
Total cost of façade glazing per façade area:
- Non-FR glazed façade (£500/m2 – £700/m2)
- 30-min FR glazed façade (£900/m2 – £1,000/m2)
- 60-min FR glazed façade (£1,600/m2 – £1,800/m2)
- 90-min FR glazed façade (£2,000/m2 – £2,400/m2)
- 120-min FR glazed façade (£3,000/m2 – £3,400/m2)
[edit] Table 5-4 Cost of sprinklers vs. potential savings
Sprinkler system cost (OH) = £70k + (GIA x £17.25)
Potential savings on
= £1-3/m2 GIA
= £15k/floor/staircase removed
Structure FP
= £10.88-77.50/m2 GIA
[edit] Lifecycle costs
The values given above are those associated with capital costs. The lifecycle cost associated with each measure varies although it should be factored in when considering the lifespan of a building. For this report, lifecycle costs are not explicitly considered because they will be project-specific and complex to estimate.
[edit] References
[6] Gross Internal Area that includes; all areas occupied by internal walls and open-sided covered areas, but excludes; open balconies, open fire escapes, and open-sided covered ways. It is the total floor area of all storeys, not the building footprint area.
[edit] Related articles on Designing Buildings
- Automatic fire sprinkler systems: A good practice guide.
- Automatic sprinkler system design and operation.
- Business Sprinkler Alliance.
- Case study A for offices to show where automatic sprinklers have the greatest impact.
- Case study B for offices to show where automatic sprinklers have the greatest impact.
- Costs of water automatic sprinkler systems.
- Design benefits of automatic sprinkler systems granted under approved document B
- Drenchers.
- Fire detection and alarm system.
- Fire detector.
- Fire in buildings.
- Fire protection engineering.
- Fire safety design.
- Making the case for sprinklers and dispelling myths.
- Overview of automatic sprinkler system design and operation
- Sprinkler systems explained: A guide to sprinkler installation standards and rules.
- Sprinklers.
- The impact of automatic sprinklers on building design.
- Watermist systems for fire protection in domestic and residential buildings DG 534.
Featured articles and news
About the 5 Percent Club and its members
The 5% Club; a dynamic movement of employers committed to building and developing the workforce.
New Homes in New Ways at the Building Centre
Accelerating the supply of new homes with MMC.
Quality Planning for Micro and Small to Medium Sized Enterprises
A CIOB Academy Technical Information sheet.
A briefing on fall protection systems for designers
A legal requirement and an ethical must.
CIOB Ireland launches manifesto for 2024 General Election
A vision for a sustainable, high-quality built environment that benefits all members of society.
Local leaders gain new powers to support local high streets
High Street Rental Auctions to be introduced from December.
Infrastructure sector posts second gain for October
With a boost for housebuilder and commercial developer contract awards.
Sustainable construction design teams survey
Shaping the Future of Sustainable Design: Your Voice Matters.
COP29; impacts of construction and updates
Amid criticism, open letters and calls for reform.
The properties of conservation rooflights
Things to consider when choosing the right product.
Adapting to meet changing needs.
London Build: A festival of construction
Co-located with the London Build Fire & Security Expo.
Tasked with locating groups of 10,000 homes with opportunity.
Delivering radical reform in the UK energy market
What are the benefits, barriers and underlying principles.
Information Management Initiative IMI
Building sector-transforming capabilities in emerging technologies.
Recent study of UK households reveals chilling home truths
Poor insulation, EPC knowledge and lack of understanding as to what retrofit might offer.